FCOB IC RGBCCT LED Strip - RGB Colors + Warm to Cool White Control with Moving Effects

Product description

Tired of LED strips where you can see every little light dot?

Wish one strip could give you white light, full color, and moving effects?

With this LED strip you can create a smooth, almost continuous line of light with RGB colors, adjustable warm-to-cool white lighting, and animated effects from the same strip.

Use it for ceilings, bedrooms, gaming setups, bars, cabinets, entertainment areas, and feature lighting where you want the lighting itself to become part of the design.

Top highlights

• Get a smooth glow without obvious LED dots: 960 LEDs per meter create a dense, more continuous-looking line of light.
• Use one strip for everyday white light and full color: Switch between RGB colors and adjustable warm-to-cool white lighting.
• Make your lighting move instead of staying one color: Create chasing, flowing, segmented, and other animated effects with a compatible SPI controller.
• Make colors around the room look more natural: Ra90 color rendering helps objects and surfaces look more true to life under the white light.
• Trim the strip closer to the size you need: Cut it at the marked points to better fit your lighting project.
• Create more detailed effects across the strip: The 5m version has around 80 separately controlled sections instead of changing the entire strip at once.

Features

• RGB + adjustable CCT white
• WS2811 addressable control
• 960 LEDs per meter
• 32 ICs per meter
• 63mm addressable sections
• Smooth FCOB light output
• Ra90 color rendering
• 24V DC operation
• 12mm PCB
• Cuttable every 63mm
• SPI controller support
• IP30 indoor version

Product specifications

• Brand: BTF-LIGHTING
• Product type: Addressable FCOB RGBCCT LED strip
• IC type: WS2811
• Input voltage: DC 24V
• Length: 5m / 16.4ft
• LED density: 960 LEDs/m
• Total LEDs: 4,800
• IC density: 32 ICs/m
• Total ICs: 160
• Maximum power: 19W/m
• Maximum power for 5m: Approximately 95W
• Cutting length: Every 60 LEDs / 63mm
• Addressable section: 60 LEDs / 63mm
• Approximate addressable sections: 80
• PCB width: 12mm
• Color type: RGB + CCT
• CRI: Ra90
• IP rating: IP30
• Connection type: 3-pin
• Connections: +24V / Data / GND
• Use: Indoor / dry locations

Important compatibility notes

• 24V power supply required: The strip does not connect directly to household AC power.
• SPI controller required: A compatible controller is needed to choose colors, adjust white light, and create animated effects.
• Controller and power supply sold separately: The LED strip is not a complete ready-to-use lighting kit.
• Controlled by section: Every 60 LEDs / 63mm works as one addressable section.
• Not individually addressable: You cannot control each of the 4,800 LEDs separately.
• IP30 is not waterproof: Use indoors or in dry, protected locations.
• Follow the data direction: Addressable LED strips must be connected in the correct signal direction.
• Power injection may be needed: Longer installations may require additional power connections to reduce voltage drop.
• Do not operate tightly rolled: Unroll the strip before extended use.
• Avoid sharp folds: Do not crease or sharply bend the COB strip.

What's in the box

• 1 × 5m BTF-LIGHTING FCOB WS2811 RGBCCT LED strip
• 2 × Non-wired gapless solderless connectors
• 1 × 3-pin JST-SM connector
• 1 × 22AWG extension wire
• 3 × LED strip fixing clips
• 1 × User manual